AWR™ Array Wave Resistivity
Dual Frequency Compensated Wave Resistivity
The AWR™ tool is a fully compensated dual frequency (2 MHz and 500 KHz) resistivity tool with 12 diameters of investigation from 3 sensors at spacings of 15”, 25” and 45”. Three spacings provide robust quantitative data for invasion corrections and processing without dielectric assumptions, or single frequency results.
The AWR™ tool is rated to operate in environments with pressures up to 25,000 psi and temperatures up to 350 °F/175 °C (static bottom hole temperature). It features a rig site replaceable battery with a 300+ hour capacity for maximum operating flexibility.
The AWR™ tool is available in nominal collar sizes from 4 ¾” to 9 ½” for hole sizes ranging from 5 7/8” to 26”.
The tools modular design allows stacking PathFinder tools in any order in the BHA to meet specific job requirements.
Case Histories
Services
- Directional Drilling
- Directional/Gamma MWD
- Gravity MWD
- Passive Ranging
- Gyro MWD
- At-Bit Inclination & Gamma Ray
- Dynamic Pressure Module
- High Pressure/High Temperature
- Resistivity
- Density/Neutron
- Sonic
- Drilling Formation Tester
- Pore Pressure
- PayZone Steering
- Real-time Communications
- Formation Evaluation
- Reliability Assurance
- Computing Center